(C-AV-SW) Skar Audio SDR Series 10" 1200 Watt Vented Subwoofer Enclosure [‎SDR-1X10D2]

Specifications:

Skar Audio SDR-10 D2 - 10" Car Subwoofer

2 Ohm Voice Coil Configuration

Peak Power: 1200 Watts

RMS Power: 600 Watts

Competition Grade Pressed Paper Cone

High Roll Foam Surround

Advanced Air Flow Cooling System

2.5" High Temperature Copper Voice Coil

Motor Weight: 97 oz

Frequency Response: 30 - 300 Hz

Sensitivity: 82.0 dB

Fs: 39 Hz

Re: 1.9 Ohms

Qms: 6.75

Qes: 0.63

Qts: 0.58

Nref: 0.116%

Cms: 0.078 mm/N

Bl: 18.41 n/a

Vas: 10.85 L

Sd: 298.65 cm²

Xmax: 13.5 mm

Skar Audio engineered the SDR-1X10D2 single 10-inch loaded vented subwoofer enclosure as a simplified solution to add a competition-grade subwoofer system in your vehicle. This loaded subwoofer enclosure features one of our powerful SDR-10 1,200 watt max power 10-inch subwoofers, which arrives pre-loaded and wired up inside of the custom single 10" vented enclosure. The enclosure features a unique kerf port design, allowing for extreme levels of bass output and sound accuracy. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. The subwoofer comes pre-wired and loaded inside of the enclosure allowing for an easy and hassle free installation. The 2-ohm subwoofer is wired up inside of the enclosure so that the final impedance load is configured for 1-ohm at the terminals.

This enclosure was engineered by Skar Audio specifically for the subwoofer that is loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and when buying a loaded enclosure it is so critical to ensure that the subwoofer and enclosure are an ideal match, or you will lose sound quality and output. With this loaded subwoofer enclosure model, all of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle.