(C-BDPG) SecondStage (セカンドステージ) HONDA FEED (GB5, GB6) Pillar Garnish [‎H008]

Pillar Garnish Parts Photo instructions included The "SecondStage" logo appears on the B pillar (front to the bottom of the second part). 

Pillar Garnish left and right (Driver side / Passenger side) *Only for vehicles with genuine Toyota visors. Installation Time: 20 - 30 minutes. 

SecondStage logo on bottom of front door pillar Since only parts that are installed on the back of the sliding door are different, the color may differ slightly from other parts. Please make sure the second stage instruction manual is included. 

Even if the length of the product is constant, the width of the gap may vary depending on the visor mounting position. Please make sure to check the position of the installation before applying it with double-sided tape. The panel is designed to fit the "factory visor". Will not fit non-OEM visors. 

This product is not a painted product. We use a second stage proprietary manufacturing method that is covered with a highly transparent acrylic layer on a sheet of specially colored patterns. It is a double-sided tape that is affixed to the surface. The product will be delivered on the product, so please peel off the release paper and install. Made with strong adhesive Sumitomo 3M double-sided tape.